Benefits of Regular Furnace Maintenance and Cleaning

Benefits of Regular Furnace Maintenance and Cleaning

When it comes to items such as your furnace, the only way you are going to continue getting good performance out of it is by ensuring regular cleaning and maintenance is being done. More »

Importance of Keeping a Motel Clean

Importance of Keeping a Motel Clean

When you are running a hotel or motel, or any other establishment for that matter, it is very important t to ensure the premises is kept as clean as possible. More »


Effective Tips for Furnace Cleaning

Furnaces keep homes warm during cold weather. You can’t be able to survive a harsh winter season without a furnace in your home. Having your furnace breakdown is the worst thing that can happen during a cold season so, how do you ensure your furnace is in good working condition at all times? Well, you must keep your furnace clean. Many furnace problems can be traced back to dirt. When dirt accumulates on components like filters and blowers, furnaces tend to malfunction. A dirty furnace heats inconsistently and consumes more power. In case you are looking for effective tips for furnace cleaning, here’s what you need to know.

1. Pay attention to the filter:

Furnaces are regarded as dirty if they have a dirty filter. Because you want clean air circulating in your home at all times, the furnace filter should be the first component you inspect and clean. Furnace filters are usually located inside the front side of the furnace. To access the filter, you may be required to unscrew or unhook the entire front panel. Some furnaces may have furnace filters with an access door. Before accessing the filter, turn off your furnace for safety reasons.

If you filter is dirty, you may need to clean or replace it. Dirty filters are usually full of dust if you touch or shake them gently. When cleaning a furnace filter, start by removing any visible dirt or loose particles. You can proceed and use a blower or vacuum cleaner to get the dust off. Some filters are also washable with mild soap and water. It all depends on the type of furnace filter you have. It’s advisable to check your user manual to find the perfect furnace filter cleaning method recommended by the manufacturer. If you clean the filter using water, make sure the filter dries properly before you put it back. Replacing a filter is easier although it may be more costly. You should follow your manufacturer’s guidelines to the letter.

Ideally, furnace filters should be replaced or cleaned at least three times a year whether the furnace is in use or not. This may obviously vary from one furnace model to another. It is, however, advisable to clean or replace the filter three to four times a year to ensure you have the best quality air in your home when you are using the furnace.

2. Clean the blower assembly too:

The furnace blower assembly also needs cleaning to boost the quality of air being blow into your house via your furnace. You need to turn the furnace off when cleaning the blower assembly to avoid electrocution. Like the furnace filter, the blower assembly is also located behind the front panel. To access it, remove the front panel and slide the blower assembly out. The blower assembly is simply a fan with some wiring that must be disconnected before you remove the blower. You may need a screwdriver if the assembly is secured using screws.

The blower assembly pushes air in and out of the furnace. For this reason, the assembly tends to accumulate dust and debris with time. You can blow the dust and debris out using a blower. However, it’s better to clean the blower assembly using soap and water. The fan blades should be cleaned using a small brush or wet cloth.

3. Clean the heat exchanger:

This is the third furnace component you should clean. As the name suggests, the heat exchanger heats cold air. The heat exchanger resembles a block with chambers. Over time, the heat exchanger gets a black build-up in its chambers. A damp cloth can get rid of this build-up effectively. As always, make sure the furnace is turned off before you start cleaning.

4. Don’t forget about the furnace ducts and vents:

HVAC system ducts and vents tend to accumulate dust and debris which can cause clogging. This can foster the growth of mold. It can also cause pest infestation. This usually happens when the furnace is not in use during hot weather. For this reason, you have to clean your furnace ducts and vents before the beginning of a cold season. Since many sections of furnace ducts and vents are inaccessible, you need the services of a HVAC professional. You can attempt to clean furnace ducts and vents yourself; however, HVAC professionals are the best professionals for the job. It may be an additional expense but, you don’t want to risk your family’s health save a few dollars.

Furnace cleaning is easy if you know what you are doing. The four effective tips for furnace cleaning should help you get a sparkling clean furnace that circulates clean hot air throughout the cold season. Furnace cleaning can be treated as a DIY project. However, you need professional help to get the job done perfectly.